|
|
FLAT-STEEL FISH TAPE - 60 FT |
This rugged, easy-to-use Klein winder reel keeps flat spring-steel tape in its place and under control. Helps prevent kinks, saves time, and protects tape. Comfortable, easy-grip design lets you turn the reel in either direction for one-hand feed or take-up while other hand directs tape or brings in back in tight. Compact, high impact Cylovac® reel is light, but built to take hard use. Four big view ports let you gauge how much tape remains. Reel dissaembles and reassembles easily to replace or switch tapes.
Price: 41.05
|
|
0.375 IN CUSHION GRIP HOLLOW SHANK NUTDRIVER |
Klein Cushion-Grip nut drivers are the best for any job. These exceptionally strong drivers are made of carefully heat-treated and tempered steel. The cushion-grip handle resists slippage which allows you to apply greater torque. Shafts are fully chrome plated. The handle grip is super-comfortable and never huts the hand. This soft, black grip interlocks permanently with a slotted plastic handle. Its deep-ribbed design and cushioning action permit the use of maximum turning power without discomfort. Grip is Resistant to oil, gas and water.
Price: 7.38
|
|
HIGH-LEV. DIAGONAL-CUTTING PLIERS |
These high-leverage diagonal-cutting pliers are heavy-duty with a head angled for easier work in confined spaces. Standard bevele cutting knives with plastic-dipped handles. For use on non-freeous wire only. Not for hard wire.
Price: 24.94
|
|
FLUSH CUTTER |
These inexpensive pliers shear wire up to No. 14 AWG with unique flush-cutting action that minimizes fly-off. The design greatly reduces cutting effort. Compact head is easy to manipulate in confined areas. Comfortable plastic covered handles.Lightweight yet rugged construction. Steel hold-open spring.
Price: 9.45
|
|
12 IN. ADJUSTABLE WRENCH |
Jaws open 3/16" wider than standard design wrenches, length for length. Extra capacity allows use of a smaller size wrench to handle bigger jobs, especially in confined spaces. Same rugged construction as standard design. Also available with heavy-duty plastic-dipped handles.
Price: 47.03
|
|
HIGH-LEVERAGE CABLE CUTTER |
Special high-leverage design gives it amazing cutting capability for its size. Cable-gripping, shear-type jaws cut up to 4/0 aluminum (not ACSR)...up to 2/0 soft cooper...up to 100-pair, 24-gauge communication cable.Makes clean, efficient cuts. Ideal for working in confined spaces. Tough, confortable, red plastic-dipped handles. Tough, comfortable. NOT designed to cut steel or ACSR.
Price: 28.60
|
|
0.312 IN CUSHION GRIP HOLLOW SHANK NUTDRIVER |
Klein Cushion-Grip nut drivers are the best for any job. These exceptionally strong drivers are made of carefully heat-treated and tempered steel. The cushion-grip handle resists slippage which allows you to apply greater torque. Shafts are fully chrome plated. The handle grip is super-comfortable and never huts the hand. This soft, black grip interlocks permanently with a slotted plastic handle. Its deep-ribbed design and cushioning action permit the use of maximum turning power without discomfort. Grip is Resistant to oil, gas and water.
Price: 7.18
|
|
0.4375 IN CUSHION GRIP HOLLOW SHANK NUTDRIVER |
Klein Cushion-Grip nut drivers are the best for any job. These exceptionally strong drivers are made of carefully heat-treated and tempered steel. The cushion-grip handle resists slippage which allows you to apply greater torque. Shafts are fully chrome plated. The handle grip is super-comfortable and never huts the hand. This soft, black grip interlocks permanently with a slotted plastic handle. Its deep-ribbed design and cushioning action permit the use of maximum turning power without discomfort. Grip is Resistant to oil, gas and water.
Price: 8.35
|
|
7-PIECE CUSHION-GRIP NUTDRIVER SET |
These exceptionally strong drivers are made of carefully heat-treated and tempered steel. The Cushion-Grip handle resists slippage which allows you to apply greater torque. Shafts are fully chrome-plated. The handle grip is super-comfortable and never hurts the hand and interlocks permanently with a slotted plastic handle. Resistant to oil, gas and water, and has a color-coded cap for quick and easy identification of hex-nut sizes
Price: 50.47
|
|
6 IN. HEAVY-DUTY LONG-NOSE PLIERS - JOURNEYMAN |
The Journeyman 8 inch long-nose pliers with side-cutting knives feature state-of- the-art, dual-material handles, that provide a better grip without sacrificing tool strength or durability. The soft, outer-surface handle material combines comfort with a firm grip, while the harder, inner-surface handle material is designed for extra toughness and durability in harsh work environments.
Price: 25.36
|
|
1/4 inch NON- MAGNETIC TIP NUTDRIVER HOLLOW SHANK |
Kleins new 6" Cushion-Grip Nut Drivers will reach into deep recesses and fit over extra-long bolts and studs to tighten and loosen fasteners. The handle domes are color coded by size.
Price: 7.67
|
|
8 IN. JOURNEYMAN DIAG.-CUTTING PLIERS |
High-leverage design. Rivet is closer to the cutting edge for 36% greater cutting power than other plier designs.Short jaws and beveled cutting edges permit close cutting of wire.Induction-hardened cutting knives for long life.Hot-riveted joint ensures smooth action and no handle wobble.High-leverage design. Rivet is closer to the cutting edge for 36% greater cutting power than other plier designs.Short jaws and beveled cutting edges permit close cutting of wire.Induction-hardened cutting knives for long life.Hot-riveted joint ensures smooth action and no handle wobble.
Price: 29.33
|
|
1/4 inch MAGNETIC TIP NUTDRIVER HOLLOW SHANK |
Kleins new 6" Cushion-Grip Nut Drivers will reach into deep recesses and fit over extra-long bolts and studs to tighten and loosen fasteners. The handle domes are color coded by size. Plus, they feature Kleins patented Tip-Ident® that shows the actual hex-head shape and size in fractional inches. The sturdy hollow steel shaft is heat treated, then chrome plated, and features integral flanges solidly anchored into the rugged plastic handle for a torque-resistant connection.
Price: 10.15
|
|
5/16 inch MAGNETIC TIP NUTDRIVER HOLLOW SHANK |
Kleins new 6" Cushion-Grip Nut Drivers will reach into deep recesses and fit over extra-long bolts and studs to tighten and loosen fasteners. The handle domes are color coded by size. Plus, they feature Kleins patented Tip-Ident® that shows the actual hex-head shape and size in fractional inches. The sturdy hollow steel shaft is heat treated, then chrome plated, and features integral flanges solidly anchored into the rugged plastic handle for a torque-resistant connection.
Price: 11.01
|
|
JOURNEYMAN HIGH LEV. CABLE CUTTER |
Kleins Journeyman cable cutter has a difference you can see and feel every time you use it. What sets klein apart from other manufacturers are the extra steps taken in the manufacturing process. Things like induction-hardened cutting knives for long life and a no handle wobble, are what make our products the choice or professionals
Price: 35.62
|
|
5-16 HEX MAGNETIC NUT DRIVER |
Similar to standard nut drivers but with powerful nut-holding magnet built into shank. Features same quality materials and workmanship as hollow-shaft tools. Made of carefully heat-treated and tempered steel
Price: 10.81
|
|
6IN SHAFT NUT DRIVER |
Vaco nut drivers meet or exceed current ANSI and MIL specifications.Patented shaft construction withstands high torque. Shafts on Vaco drivers are completely hollow, from the socket to the handle, to accommodate the longest stud. Sockets and shafts are specially heat treated for extra hardness. Exterior surfaces are finished in bright nickel-chrome for durability and corrosion resistance. Handles are break resistant, impervious to most acids and alkalies.
Price: 7.77
|
|
SCRATCH AWL |
This professional, heavy-duty, hard-pointed awl scribes metal, starts screw-holes, performs a variety of piercing and punching jobs. Rigid, chrome-plated, heat-treated, tempered-steel shank has full reinforcing bolster at handle for extra strength. Flanged shank is anchored deep in full-sized amber plastic handle with Cushion-Grip for maximum comfort.
Price: 10.64
|
|
DUAL-PURPOSE HACKSAW |
Powerful, efficient cutting action. Handle design and rigid steel box-frame concentrate force at the blade-edge. Easy, fingertip tensioning adjustment for longer blade life and straight, clean cuts. Simple, direct screw-pivot in handle puts full, even tension on all blades. Tough, die-cast aluminum handle and front end. Excellent design for two-hand sawing. Blade cuts fully through a flat surface; converts easily from vertical to 45° angle. Front-ends holds blade for use as a jab saw. Box-frame stores extra blades. Supplied with Golden Tri-Cut® blade.
Price: 31.68
|
|
12 PWR EXT. DUP. REC. NON SURGE |
Our Lay-flat Extensions combine the durable Flexiduct with options for power, phone and fax extensions.
Price: 49.99
|
|
|
|