|
|
Fluke CableIQ Advanced IT Kit |
Why use a Qualification tester? A Qualification tester is used to determine what speeds your network can handle. It differs from a Certification tester (like the Fluke DTX Cable Analyzer) in that a network certification tester insures compliance to industry standards such as TIA/ISO. The CableIQ Qualification tester allows you to perform various troubleshooting tests to locate your trouble spot. Do you need to determine whether your existing cabling setup supports your 1000BASE-T (Gigabit) network? A qualification tester is all you need. Basically, if youre looking to differentiate between cabling problems and network problems, a qualification tester is all you need.
Price: 2143.50
|
|
T&B Insulation Piercing Fork Terminal (1000 per pack) 0.25 #8 |
Magnet wire is available with many types of insulation, depending on the end use. For example Polyurethane, which is suitable for use up to 130C, has good solderability. Other film types such as Polyesterimide (180C), and Armored Polyesterimide (220C) are very tough, and due to their high temperature stability are not suitable for soldering except with removal of the jacket. Therefore, due to the toughness and high temperature stability of the insulation, it creates problems splicing and terminating.Another problem is when manufacturers need to connect aluminum magnet wire to copper. The two materials exhibit different thermal properties, as well as different responses to various temperatures seen in the applications.Thomas and Betts (T&B) has a unique solution to these issues with their Dragon Tooth ® Insulation piercing terminals. Now you no longer need to weld or remove the outer jacket of the magnet wire to perform your splices or terminations
Price: 382.08
|
|
T&B Insulation Piercing Fork Terminal (1000 per pack) 0.16 #10 |
Magnet wire is available with many types of insulation, depending on the end use. For example Polyurethane, which is suitable for use up to 130C, has good solderability. Other film types such as Polyesterimide (180C), and Armored Polyesterimide (220C) are very tough, and due to their high temperature stability are not suitable for soldering except with removal of the jacket. Therefore, due to the toughness and high temperature stability of the insulation, it creates problems splicing and terminating.Another problem is when manufacturers need to connect aluminum magnet wire to copper. The two materials exhibit different thermal properties, as well as different responses to various temperatures seen in the applications.Thomas and Betts (T&B) has a unique solution to these issues with their Dragon Tooth ® Insulation piercing terminals. Now you no longer need to weld or remove the outer jacket of the magnet wire to perform your splices or terminations
Price: 376.65
|
|
Fluke FO Test Adapter Singlemode |
The DSP-4000 series testers can be adapted very easily for testing of high-speed fiber networks. Whether your need is for Multimode, Single mode, or Gigabit, Fluke Networks has the right equipment for you. - DSP-FTA420S allows you to test 850 nm and 1300 nm multimode wavelengths up to 5000 meters- DSP-FTA430S allows you to test 1300 nm and 1500 nm wavelengths up to 10K meters- DSP-FTA440S uses a VCSEL (Vertical Cavity Surface Emitting Laser) source at 850 nm and an FP Laser light source at 1310. It accurately measures loss and length up to 5000 meters to ensure Gigabit Ethernet compliance.
Price: 5546.00
|
|
Fluke Gigabit Multimode VSL Adapter |
The DSP-4000 series testers can be adapted very easily for testing of high-speed fiber networks. Whether your need is for Multimode, Single mode, or Gigabit, Fluke Networks has the right equipment for you. - DSP-FTA420S allows you to test 850 nm and 1300 nm multimode wavelengths up to 5000 meters- DSP-FTA430S allows you to test 1300 nm and 1500 nm wavelengths up to 10K meters- DSP-FTA440S uses a VCSEL (Vertical Cavity Surface Emitting Laser) source at 850 nm and an FP Laser light source at 1310. It accurately measures loss and length up to 5000 meters to ensure Gigabit Ethernet compliance.
Price: 4544.00
|
|
Fluke DTX 1200 Cat 6 Cable Tester |
The Fluke DTX Series Cable Analyzers were designed with your time in mind. They significantly reduce the time it takes to certify your network when compared with competitors analyzers. The Fluke DTX testers will test and certify your CAT 6 cable in 12 seconds. Most other testers take over 30 seconds to perform the same test. This translates to 85 extra certifications before lunch! Not only do these analyzers test for problems, they also suggest potential actions to correct the problem, saving even more troubleshooting time.The DTX 1200 has a maximum testing bandwidth of 350 MHz, allowing all tests to be done in just 12 seconds in full compliance with industry standards.The DTX 1800 has a maximum testing bandwidth of 900 MHz, which will allow you to test video distribution, Class F, CATV and 10 Gigabit Ethernet cables
Price: 7046.00
|
|
Large Cable Tie Kit - 1200 pieces |
1200 Pieces Cable Ties.Cable ties are a secure, convenient and inexpensive way to handle your wire management. Cable ties are, by far, the most economical way to secure bundles of wires. Cable ties are also remarkably strong and secure.
Price: 9.99
|
|
Small Cable Tie Kit - 600 pieces |
600 Pieces Cable Ties.Cable ties are a secure, convenient and inexpensive way to handle your wire management. Cable ties are, by far, the most economical way to secure bundles of wires. Cable ties are also remarkably strong and secure.
Price: 4.99
|
|
Large Cable Turtle - Dark Yellow |
Do you ever have the situation where you have a six foot cord when all you need is a one foot cord? With the convenient Cable Turtle, you can keep unsightly wire and cable out of site. With a turn of the hand wind the excess wire around the open Cable Turtle.
Price: 9.99
|
|
1.88"x60yds Professional Duck Tape |
Duct tape is a multi-purpose product that works for just about any application. Made with a high-tack rubber based adhesive, Fire Guard and Professional Duck Tape sticks to various surfaces with ease. The tapes feature a cotton/polyester cloth and thick polyethylene backing to make them both water proof and tear resistant.
Price: 6.37
|
|
2.83" x 60yds Superwide Duck Tape |
Duct tape is a multi-purpose product that works for just about any application. Made with a high-tack rubber based adhesive, Fire Guard and Professional Duck Tape sticks to various surfaces with ease. The tapes feature a cotton/polyester cloth and thick polyethylene backing to make them both water proof and tear resistant.
Price: 11.06
|
|
2.5"x50yds HVAC Rigid Fiberglass Tape |
HVAC Ridgid Fiberglass tape has a heavy duty, high strength aluminum foil backing coated with a specially formulated acrylic adhesive. This tape provides maximum conformance and adhesion to fiberglass ductboard systems. This tape meets and exceeds UL-181A-P Standard for quality, performance, and flame spread AND UL181-FX flexduct standard.
Price: 14.96
|
|
Large Cable Turtle - Green |
Do you ever have the situation where you have a six foot cord when all you need is a one foot cord? With the convenient Cable Turtle, you can keep unsightly wire and cable out of site. With a turn of the hand wind the excess wire around the open Cable Turtle.
Price: 9.99
|
|
Large Cable Turtle - Gray |
Do you ever have the situation where you have a six foot cord when all you need is a one foot cord? With the convenient Cable Turtle, you can keep unsightly wire and cable out of site. With a turn of the hand wind the excess wire around the open Cable Turtle.
Price: 9.99
|
|
Large Cable Turtle - Red |
Do you ever have the situation where you have a six foot cord when all you need is a one foot cord? With the convenient Cable Turtle, you can keep unsightly wire and cable out of site. With a turn of the hand wind the excess wire around the open Cable Turtle.
Price: 9.99
|
|
1.88"x10yd Aluminum Metal Repair Tape |
The Aluminum Metal Repair Tape is ideal for metal, auto, and aluminum repairs and works well in all HVAC applications. The dead soft aluminum foil material is coated with a permanet rubber based adhesive that bonds strongly to just about any surface. The excellent sealing and protective benefits of aluminum with the ease of pressure sensitive tape are combined to engineer this amazing tape.
Price: 2.64
|
|
1" Fast-Drop Radius Control Module with Hook & Loop |
Fast-Drop was designed to have an ideal bend limiter radius, so that it creates a precise 90° angle to efficiently route your fiber optic cabling. With the fast drop securely in place you can avoid sharp bends and ensure consistent data transmission. Available in Black and Beige.
Price: 1.85
|
|
1" Fast-Drop Radius Control Module with Hook & Loop QTY 100 |
Fast-Drop was designed to have an ideal bend limiter radius, so that it creates a precise 90° angle to efficiently route your fiber optic cabling. With the fast drop securely in place you can avoid sharp bends and ensure consistent data transmission. Available in Black and Beige.
Price: 175.00
|
|
1-3/4" Fast-Drop Radius Control Module with Hook & Loop |
Fast-Drop was designed to have an ideal bend limiter radius, so that it creates a precise 90° angle to efficiently route your fiber optic cabling. With the fast drop securely in place you can avoid sharp bends and ensure consistent data transmission. Available in Black and Beige.
Price: 2.25
|
|
7 INCH 50 lb Mounted Head CABLE TIES (100 per pack) |
Mounted head cable ties are design to built and mount at the same time. Length is 7 inches.
Price: 8.99
|
|
|
|