|
| |
| 501 SERIES Wall Snake Tray 2" X 2" |
This stud type anchor design allows easy through type fastenings and can be set in bottomless holes. The anchor is preassembled to ensure an easy and fast installation. Anchor size is te same as drill bit size for an easy installation. Snake Tray has performed comprehensive testing to guarantee high performance in block,masonry and concrete base materials. Our special design prevents the anchors from spinning in the hole.The anchor will not drop out while setting the overhead
Price: 41.50
|
|
| 501 SERIES Wall Snake Tray 3" X 3" |
The 501 Series Wall Snake Tray is utilized for long linear installations where space is at a premium. Installers know the difficulty of using cable trays in tight spaces but the wall snake tray is the best solution because they are designed to allow the tray to be directly attached to a wall without the use of brackets . The tray uses integrated mounting rings located along the center spine of the tray. With these rings, no additional brackets or mounting hardware is required
Price: 51.80
|
|
| 3" Set Screw EMT CONNECTOR Qty 1 |
Zinc Die Cast Set Screw connectors used to join EMT conduit to a box or enclosure. Ball burnished, mirror smooth.
Price: 10.99
|
|
| 1/2" Set Screw EMT COUPLING Qty 50 |
Zinc Die Cast Set Screw Couplings used to join two lengths of EMT conduit. Ball burnished, mirror smooth.
Price: 22.99
|
|
| 3/4" Set Screw EMT COUPLING Qty 25 |
Zinc Die Cast Set Screw Couplings used to join two lengths of EMT conduit. Ball burnished, mirror smooth.
Price: 18.99
|
|
| 1" Set Screw EMT COUPLING Qty 25 |
Zinc Die Cast Set Screw Couplings used to join two lengths of EMT conduit. Ball burnished, mirror smooth.
Price: 31.99
|
|
| 501 SERIES Wall Snake Tray 5" X 5" |
The 501 Series Wall Snake Tray is utilized for long linear installations where space is at a premium. Installers know the difficulty of using cable trays in tight spaces but the wall snake tray is the best solution because they are designed to allow the tray to be directly attached to a wall without the use of brackets . The tray uses integrated mounting rings located along the center spine of the tray. With these rings, no additional brackets or mounting hardware is required
Price: 60.00
|
|
| SNAKE TRAY 601 Series Ladder Snake 6 1/2"D X 8 1/2"W |
The new 601 Series of cable trays called Ladder Snake is especially designed for ladder racks. Ladder Snake instantly bends by hand without any cutting or clipping to ensure a smooth transition from one ladder rack to another. You just snap Ladder Snake 601 onto a new ladder to instantly gain greater cable capacity. You can also snap Ladder Snake (TN) 601 HP (half the depth of CM-601-12-8) onto an existing ladder rack to bridge over the existing cable plant to create a new second tier cable path. NO Additional hardware or brackets are needed to attach to the ladder rack. Ladder Snake has an easy clip on feature to save you money and installation costs!
Price: 92.20
|
|
| 2" Set Screw EMT COUPLING Qty 10 |
Zinc Die Cast Set Screw Couplings used to join two lengths of EMT conduit. Ball burnished, mirror smooth.
Price: 43.99
|
|
| 3" Set Screw EMT COUPLING Qty 1 |
Zinc Die Cast Set Screw Couplings used to join two lengths of EMT conduit. Ball burnished, mirror smooth.
Price: 8.99
|
|
| 4" Set Screw EMT COUPLING Qty 1 |
Zinc Die Cast Set Screw Couplings used to join two lengths of EMT conduit. Ball burnished, mirror smooth.
Price: 11.99
|
|
| 1/2" EMT Compression Coupling Qty 50 |
Zinc Die Cast couplings used to join two lengths of EMT conduit. Ball burnished, mirror smooth, and concrete tight.
Price: 53.99
|
|
| 3/4" EMT Compression Coupling Qty 25 |
Zinc Die Cast couplings used to join two lengths of EMT conduit. Ball burnished, mirror smooth, and concrete tight.
Price: 34.99
|
|
| SNAKE TRAY 601 Series Ladder Snake 3 1/2"D X 81/2" W |
The new 601 Series of cable trays called Ladder Snake is especially designed for ladder racks. Ladder Snake instantly bends by hand without any cutting or clipping to ensure a smooth transition from one ladder rack to another. You just snap Ladder Snake 601 onto a new ladder to instantly gain greater cable capacity. You can also snap Ladder Snake (TN) 601 HP (half the depth of CM-601-12-8) onto an existing ladder rack to bridge over the existing cable plant to create a new second tier cable path. NO Additional hardware or brackets are needed to attach to the ladder rack. Ladder Snake has an easy clip on feature to save you money and installation costs!
Price: 97.00
|
|
| SNAKE TRAY 201 SERIES CABINET MOUNT BRACKET-DOUBLE SNAKE |
Our best selling and most versatile labor saving cable tray cable management systems is the 201 Series Snake Tray. It can be mounted below access floors, wall mounted, ceiling mounted or suspended from a threaded rod. The 201 Series Snake Tray is available in six sizes and can hold up to 700 Category 5/6 cables at 100% fill with up to 50 square inches of cable path. Better than a generic basket or ladder type tray, its patented top mounted center spine allows the tray to be easily bent by hand to create both horizontal and vertical bends when needed to go over and around obstacles
Price: 30.85
|
|
| Zinc Plated 3/8" Washer for Snake Tray |
Zinc Plated 3/8" washer accessory for Snake Tray
Price: .10
|
|
| 2" EMT Compression Coupling Qty 10 |
Zinc Die Cast couplings used to join two lengths of EMT conduit. Ball burnished, mirror smooth, and concrete tight.
Price: 76.99
|
|
| 3" EMT Compression Coupling Qty 12 |
Zinc Die Cast couplings used to join two lengths of EMT conduit. Ball burnished, mirror smooth, and concrete tight.
Price: 230.50
|
|
| 4" EMT Compression Coupling Qty 6 |
Zinc Die Cast couplings used to join two lengths of EMT conduit. Ball burnished, mirror smooth, and concrete tight.
Price: 184.50
|
|
| 1/2" Flexible Conduit Squeeze CONNECTOR Qty 50 |
Zinc Die Cast Flexible Conduit Squeeze Connectors are used to connect flexible metal conduit or armored cable to a box or enclosure. Ball burnished, mirror smooth.
Price: 64.99
|
|
| |
|
